Steel Power Line Fittings Suspension Guy Wire Clamp For Dead End Hardware

hot dip galvanzied one bolt /two bolt /three bolt suspension guy wire clamp for deadend hardware

Decscription:

• Parallel groove clamp with three bolt suspension cable clamp is used for ADSS cable and wire clamp

• Rolled from carbon steel with straight parallel grooves that will not damage strand

• The clamping bolts have special shoulders to prevent turning when the nuts are tightened

• Constructed of high quality steel, hot-dip galvanized

• used for deadend cable clamp with three bolted guy clamp

• there are one bolt ,two bolts and three bolts guy wire clamp

• Main specifications for our guy clamp:

  TYPE	Length	Width	Product Finish	Material	Note	Weight	Accommodates Strand Sizes
  Offset 6409	3 1/4"	1 1/2"	Galvanized, ASTM A-153	Steel	Two 1/2" Carriage Clamping Bolts	1.32 lbs	3/16" to 5/16"
  Offset 6410	4" (102 mm)	1 5/8"	Galvanized, ASTM A-153	Steel	Two 5/8" Carriage Clamping Bolts	1.69 lbs	5/16" to 1/2"
  Straight 6448	3 3/8"	1 9/16"	Galvanized, ASTM A-153	Steel	Two 1/2" Carriage Clamping Bolts	1.18 lbs	1/4" to 7/16"
  Straight 6449	4" (102 mm)	1 9/16"	Galvanized, ASTM A-153	Steel	Three 1/2" Carriage Clamping Bolts	1.59 lbs	1/4" to 7/16"
  Straight 6450	6" (152 mm)	1 9/16"	Galvanized, ASTM A-153	Steel	Three 1/2" Carriage Clamping Bolts	2.12 lbs	1/4" to 7/16"
  Straight 6460	6" (152 mm)	2 1/8"	Galvanized, ASTM A-153	Steel	Three 5/8" Carriage Clamping Bolts	4.05 LBS	3/8" to 5/8"
  Straight 6461	6" (152 mm)	1-21/32"	Galvanized, ASTM A-153	Steel	Three 5/8" Carriage Clamping Bolts	2.4 lbs	5/16" to 1/2"
  Straight 6462	4" (102 mm)	1 21/32"	Galvanized, ASTM A-153	Steel	Two 5/8" Carriage Clamping Bolts	1.74 lbs	5/16" to 1/2"
  Strait 7901	2 1/2"		Galvanized, ASTM A-153	Steel	5/8" Mounting Bolt	0.66 lbs	1/4" to 7/16"
  Angled 7902L	7" (178 mm)		Galvanized, ASTM A-153	Steel	5/8" Mounting Bolt	2 lbs	1/4" to 7/16"
  Angled 7902R	7" (178 mm)		Galvanized, ASTM A-153	Steel	3/4" Mounting Bolt	1.97 lbs	1/4" to 7/16"
  Strait 7903	5 3/4"		Galvanized, ASTM A-153	Steel	5/8" Mounting Bolt	1.83 lbs	1/4" to 7/16"
  Strait 7903L	5 3/4"		Galvanized, ASTM A-153	Steel	5/8" Mounting Bolt	1.57 lbs	1/4" to 7/16"
  Angled 7904	5 3/4"		Galvanized, ASTM A-153	Steel	3/4" Mounting Bolt	1.74 lbs	1/4"

  

APPLICATION:

• Parallel grooves trap strand tightly without marring. Plate halves align evenly for easy application. Each bolt has a shoulder to prevent turning while tightening.

• Features straight parallel grooves for greater clamping area without damage to guy strand. Bolts have shoulders to prevent turning when nut is tightened. Alternate bolts are reversed for wrench clearance

electric power fittings

pole line hardware

Steel Power Line Fittings Suspension Guy Wire Clamp For Dead End Hardware Images